Plus 2.X:Tree: Unterschied zwischen den Versionen

Aus Wufiwiki
Zur Navigation springenZur Suche springen
Keine Bearbeitungszusammenfassung
 
(18 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
=Navigation Tree=
=Navigation Tree=


[[Bild:WUFI-PlusNavigationTree1.jpg|thumb|right]]
The Navigation Tree is a helpful instrument to navigate while editing the inputs. It is advisable to follow its structure while working on a project so as not to forget any important input.  
The Navigation Tree is a helpful instrument to navigate while editing the inputs. It is advisable to follow its structure while working on a project so as not to forget any important input.  
The project is divided in Cases. In these cases are the elements climate and building.The building is divided further in zones and attached zones.
The project is divided in cases. In these cases are the elements climate and building. The building is further divided in zones and attached zones.<BR>
 
[[Bild:P2-Navigation_Tree.png]]
 
*[[Plus 2.X:Project|Project]]
== Files/Measured Data ==
*[[Plus 2.X:Files/Measured Data|Files/Measured Data]]
 
*[[Plus 2.X:Dialog Case|Case 1]]
If the current project requires the use of not contained weatherfiles or other data they can be included in the project in the dialog "Files / Measured Data". By clicking "New" a new file is created, which can be edited with "Edit". This will open the dialog below. The data can here either be uploaded or entered manually and then be processed. There are several possibilities formatting the data. Either with a given equal length of the columns or with a default separator between the columns. Every column in the file structure must then be suggested of the type of values (radiation, temperature, other numerical values defined). If this is done and the file saved you must check the accuracy of the files with the "check consistency". If a file is included to the WUFIplus project it can now be chosen in the respective dialogs.
**[[Plus 2.X:Dialog_Climate|Climate]]
 
**[[Plus 2.X:Building|Building]]
[[Bild:Procedure_Measured.jpg|left|750px]]
***[[Plus 2.X:Heated_Zones|Heated Zones]]
<br style="clear:both;" clear="all" />
****[[Plus 2.X:Zone_1|Zone 1]]
 
*****[[Plus 2.X:Visualized_Components|Visualized Components]]
 
*****[[Plus 2.X: Not_Visualized_Components|Not Visualized Components]]
== Case 1 ==
*****[[Plus 2.X:Inner_Loads|Inner Loads/Occupancy]]
*****[[Plus 2.X:Design_Conditions|Design Conditions]]
*****[[Plus 2.X:Other_Parameters|Other Parameters]]
***[[Plus 2.X:Attached_Zones|Attached Zones]]
***[[Plus 2.X:3D-Objects|3D-Objects]]
***[[Plus 2.X:Remaining_Elements|Remaining Elements]]
**[[PLus 2.X:HVAC|HVAC]]

Aktuelle Version vom 26. März 2012, 10:14 Uhr

Navigation Tree

The Navigation Tree is a helpful instrument to navigate while editing the inputs. It is advisable to follow its structure while working on a project so as not to forget any important input. The project is divided in cases. In these cases are the elements climate and building. The building is further divided in zones and attached zones.
P2-Navigation Tree.png

Abgerufen von „https://www.wufi-wiki.com/mediawiki/index.php?title=Plus_2.X:Tree&oldid=2663“