Plus:Dialogs: Unterschied zwischen den Versionen

Aus Wufiwiki
Zur Navigation springenZur Suche springen
 
(34 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 35: Zeile 35:
&nbsp;<BR>
&nbsp;<BR>


=== Inputs ===
=== Inputs: ===


[[Bild:WUFI-Plus_Inputs.png]]
[[Bild:WUFI-Plus_Input2.png]]


* [[Plus:Dialog_ProjectData | <B>Project Data</B>]] <br> Here you define all information of the project, includes the name and adress of the client and special remarks of the project.
* [[Plus:Dialog_Project | <B>Project</B>]] <br> Here you define all information of the project, includes the name and adress of the client and special remarks of the project.
* [[Plus:Dialog_Case | '''Case''']]<BR> Here you define '''general''' information about the project and the the '''time of calculation'''. Additional under the button '''results''' the report of the calculation is available on this page after the calculation.
* [[Plus:Dialog_Case | '''Case 1''']]<BR> Here you define '''general''' information about the project and the '''time of calculation'''. Additional the button [[Plus:Dialog_Results | '''results''']] shows the report of the calculation which is available after the calculation.<BR>
** [[Plus:Dialog_Climate | '''Climate''']]<BR> This dialog serves to specify the [[Details:Climate | weather]] acting on the outer boundaries of the building, respectively.<br> Possible is to define a typical [[Details:Climate | external climate]] or [[Plus:Dialog_Climate#Optional Climate | optional climate]].<BR>
** [[Plus:DialogBuildingWizard | '''Building''']]<BR> On this page you can find the [[Plus:DialogBuildingWizard#Automatic building wizard | building wizard]] which help you to design the building dimensions. And at this dialog the [[Plus:Dialog_Zones | zones]] and [[Plus:Dialog_AttachedZones | attached zones]] get visible when the building is designed.
* [[Plus:Dialog_HVAC | '''HVAC''']]<BR> This dialog includes the input mask for all data concerning the HVAC-System.


'''Here you define the [[Glossary:Glossary-1D | assembly]] of the [[Glossary:Glossary-1D | building component]] by specifying the layer sequence and the layer thicknesses as well as the [[Details:Material | material parameters]] of the individual layers.<BR> You can also select an appropriate [[Glossary:Glossary-1D | numerical grid]], specify [Glossary:Glossary-1D | monitoring positions]] at locations where the hygrothermal behavior of the component shall be analysed in detail, and add [[1D:Dialog_HygrothermalSources | hygrothermal sources and sinks]] to the component.
=== Options: ===
** [[1D:Dialog_MaterialData | <B>Material Data</B>]]<br> This dialog displays the [[Details:Material | material data]] for the highlighted layer and allows you to edit them.
** [[1D:Dialog_MaterialDatabase | <B>Material Database</B>]]<br> In this dialog you can select the [[Details:Material | material data]] for the highlighted layer from the material database.
** [[1D:Dialog_ConstructionDatabase | <B>Example Cases</B>]]<br> In this dialog you can select an assembly from the construction database and transfer it to the assembly dialog.
** [[1D:Dialog_HygrothermalSources | <B>Hygrothermal Sources</B>]]<br> You can specify heat, moisture and air change sources (or sinks) for the highlighted layer.
*** [[1D:Dialog_EditHygrothermalSources | <B>Edit Hygrothermal Sources</B>]]<br> Specify the location and the properties of the sources.
&nbsp;<BR>
* [[1D:Dialog_Orientation | <B>Orientation / Inclination / Height</B>]]<br> This dialog serves to define the orientation, inclination and height of the building component. These data are needed to calculate the [[Details:Climate | rain and radiation loads]] incident on the surface.<BR>
&nbsp;<BR>
* [[1D:Dialog_SurfaceTransferCoefficients | <B>Surface Transfer Coefficients</B>]]<BR> In this dialog you define the [[Details:Surface | surface transfer coefficients]], such as the [[Details:HeatTransfer | heat transfer coefficient]], the [[Details:ShortWave | radiation absorptivity]], [[Details:RainReductionFactor | rain reduction factor]] etc.<BR>
&nbsp;<BR>
* [[1D:Dialog_InitialConditions | <B>Initial Conditions</B>]]<BR> The initial temperature and moisture distributions are specified in this dialog (e.g. a dry component or one with trapped construction moisture).
** [[1D:Dialog_InitialMoisture | <B>Initial Moisture</B>]]
** [[1D:Dialog_InitialTemperature | <B>Initial Temperature</B>]]<BR> These dialogs serve to specify initialisation files which describe the initial moisture or temperature profiles in the component, if these are to be read from files.<BR>
* [[1D:Dialog_Time | <B>Calculation Period / Profiles</B>]]<BR> Here you tell WUFI for which period of time the simulation shall be carried out (e.g. the simulation is to span one year, starting on June 1st).<BR>
&nbsp;<BR>
You can also specify the width of the time steps used for the calculation.<BR>
&nbsp;<BR>
* [[1D:Dialog_Numerics | <B>Numerics</B>]]<BR> The options offered by this dialog allow you to control the way the calculation is done.<BR>
&nbsp;<BR>
* [[1D:Dialog_Climate | <B>Climate: Outdoor (Left Side)</B>]]
* [[1D:Dialog_Climate | <B>Climate: Indoor (Right Side)</B>]]<BR> These dialogs serve to specify the [[Details:Climate | weather]] acting on the left or right side of the component, respectively.
** <B>Map/File</B><br> If you want to read the climate data from a file, use this tab to specify and analyse the file.
*** <B>Select Climate File</B><br> Select the desired climate file:
**** [[1D:Dialog_SelectClimateFileFromMap | <B>Select from map</B>]]<BR> If you want to use one of the climate files supplied with WUFI, specify it by clicking on the respective location on the map.
**** [[1D:Dialog_SelectClimateFileFromBrowser | <B>Select user-defined file</B>]]<BR> If you want to use a climate file from a different source, select it with the file browser
*** [[1D:Dialog_ClimateFileDetails | <B>Detailed Options</B>]]<BR> Depending on the climate file type, additional options may be available.
** <B>Sine Curves</B><BR> You may use simple sine curves as climate conditions.
** <B>EN 13788</B><BR> You may have the interior climate derived from the exterior climate by the method described in DIN EN ISO 13788.
** <B>EN 15026</B><BR> You may have the interior climate derived from the exterior climate by the method described in EN 15026.
** <B>ASHRAE 160P</B><BR> You may have the interior climate derived from the exterior climate by the method described in ASHRAE Standard 160P.'''


=== Run ===
[[Bild:WUFI-Plus_Options.png]]


[[Bild:MenuRun.gif]]
* [[Plus:Dialog_Options#Default Data | '''Default Settings / Data''']]<BR> To choose a default climate.
 
&nbsp;<BR>
* <B>Run Calculation</B><BR> Starts the calculation for the current case, but shows only a progress bar instead of the film.<BR>
* [[Plus:Dialog_Options#Warnings | '''Warnings''']]<BR> Tell WUFI which events shall cause a warning.<BR>
&nbsp;<BR>
&nbsp;<BR>
* <B>Run all Calculations</B><BR> Starts the calculation for all cases in the project in succession and only shows a progress bar instead of the film.<BR>
* [[Plus:Dialog_Options#Other Options | '''Other''']]<BR> Three options can be choose here.<BR>
** Start the software window with a full screen.<BR>  
** Save the results with the project file.<BR>
** Include all graphs in results.<BR>
&nbsp;<BR>
&nbsp;<BR>
* [[1D:Dialog_RunCalculationWithFilm | <B>Run Calculation with Film</B>]]<BR> Open this dialog to start the calculation and watch the thermal and hygric processes going on in the component during the simulation (the 'film').
* [[Plus:Dialog_Options#Default Assemblies | '''Default Assemblies''']]<BR> Define default assemblies for the components.
** [[1D:Dialog_FilmProperties | <B>Run Calculation - Properties</B>]]<BR> This subdialog lets you configure the film display.<BR>
&nbsp;<BR>
&nbsp;<BR>
* [[Plus:Dialog_Options#Default window data | '''Windows type''']]<BR> Define default window types and save it in the Database.


=== Outputs ===
=== Database: ===


[[Bild:MenuOutputs.gif]]
[[Bild:WUFI-Plus_Database.png]]


* [[1D:Dialog_QuickGraphics | <B>Quick Graph</B>]]<BR> The quick graphs give you a quick overview of the calculation results.<BR>
* [[Plus:Dialog_DatabaseMaterials | <B>Database Materials</B>]]<BR> View the material data contained in the materials database or add your own materials.<BR>
** [[Plus:Dialog_DatabaseMaterialsNew | <B>Database Materials - New Material</B>]]<BR> Define a new material for inclusion in WUFI's materials database.
** [[Plus:Dialog_DatabaseMaterialsNew | <B>Database Materials - Change Material</B>]]<BR> Edit one of the materials you have added to the database. (The predefined materials in the database cannot be edited.)
** <B>Database Materials - Delete</B><BR> Delete from the database one of the materials you have added. (The predefined materials in the database cannot be deleted.)
** [[Plus:Dialog_DatabaseMaterials | <B>Database Materials - Edit Catalogue</B>]]<BR> Add or edit a database catalogue.<br>
&nbsp;<BR>
&nbsp;<BR>
* <B>Input Data Summary / Last Calculation</B><BR> This dialog displays data sheets with the input data (such as the [[1D:Dialog_Assembly | assembly]] and the [[1D:Dialog_MaterialData | material data]]) and a summary of the calculation results, formatted for printing.
* [[Plus:Dialog_DatabaseAssemblies | <B>Database Assemblies</B>]]<BR> View the constructions contained in the constructions database or add your own constructions.<BR>
**[[1D:Dialog_InputOverviewOptions | <B>Input Data Summary - Options</B>]]<BR> Use this dialog to select the data that shall be included in the Input Data Summary.<BR>
** [[Plus:Dialog_DatabaseAssembliesNew | <B>Database Assemblies - New Construction</B>]]<BR> Define a new construction for inclusion in WUFI's constructions database.
&nbsp;<BR>
** [[Plus:Dialog_DatabaseAssembliesNew | <B>Database Assemblies - Change Construction</B>]]<BR> Edit one of the constructions you have added to the database. (The predefined constructions in the database cannot be edited.)
* [[1D:Dialog_InfoLastCalculationRun | <B>Status: Last Calculation</B>]]<BR> This dialog displays a short summary of the calculation results.<BR> It is automatically displayed at the end of the calculation. You should check the provided info (in particular, the water balance) to make sure no numerical problems have occurred.<BR>
** <B>Database Assemblies - Delete</B><BR> Delete from the database one of the constructions you have added. (The predefined constructions in the database cannot be deleted.)
&nbsp;<BR>
** [[Plus:Dialog_DatabaseAssemblies | <B>Database Assemblies - Edit Catalogue</B>]]<BR> Add or edit a database catalogue.<BR>
* [[1D:Dialog_ResultGraphs | <B>Result Graphs</B>]]<BR> This dialog displays the calculation results in the form of graphs showing [[Glossary:Glossary-1D | courses]] and [[Glossary:Glossary-1D | profiles]], formatted for printing.
** [[1D:Dialog_PageSetup | <B>Page Setup</B>]]<BR> This dialog allows you to edit the name of the highlighted graphics page.
** [[1D:Dialog_GraphSetupCourses | <B>Graph Setup, Courses</B>]]<BR> Here you can edit the settings for a graph that displays courses.
** [[1D:Dialog_GraphSetupProfiles | <B>Graph Setup, Profiles</B>]]<BR> Here you can edit the settings for a graph that displays profiles.
**[[1D:Dialog_CurvesSetup | <B>Curves Setup</B>]]<BR> Here you can edit the settings for a curve.
** [[1D:Dialog_InsertCurves | <B>Insert Curves</B>]]<BR> Here you can assign additional curves showing calculation results to the current graph.
** <B>Delete Curves</B><BR> Here you can remove a curve from the current graph.
 
* <B>View Film</B><BR> This dialog displays the calculation results in the form of a film showing the thermal and hygric processes in the building component as an animation.<BR>
&nbsp;<BR>
* [[1D:Dialog_MeasuredData | <B>Measured Data</B>]]<br> Here you can specify a file with measured data. You can configure the result graphs to show them together with the WUFI results, allowing easy comparison of calculation and measurement.<BR>
&nbsp;<BR>
* [[1D:Dialog_ASCIIExport | <B>ASCII Export</B>]]<BR> Instead of viewing the results with WUFI's graphics dialog, you may also write them to an ASCII file and analyse them on your own.<BR>
&nbsp;<BR>
* <B>Export Film</B><BR> You can export the film and display it with an external film viewer (in WUFI Pro only).<BR>
&nbsp;<BR>
 
=== Options ===
 
[[Bild:MenuOptions.gif]]
 
* [[1D:Dialog_OptionsUnitSystem | <B>Unit System</B>]]<BR> Switch between SI and IP units.<BR>
&nbsp;<BR>
&nbsp;<BR>
* [[1D:Dialog_OptionsWarnings | <B>Warnings</B>]]<BR> Tell WUFI which events shall cause a warning.<BR>
* [[Plus:Dialog_DatabaseWindows | '''Database Windows''']]<BR> View the window data contained in the window database or add your own windows.<BR>
** [[Plus:Dialog_DatabaseWindowsNew | <B>Database Windows - New Window</B>]]<BR> Define a new window for inclusion in WUFI's windows database.
** [[Plus:Dialog_DatabaseWindowsNew | <B>Database Windows - Change Window</B>]]<BR> Edit one of the windows you have added to the database. (The predefined windows in the database cannot be edited.)
** <B>Database Windows - Delete</B><BR> Delete from the database one of the windows you have added. (The predefined windows in the database cannot be deleted.)
** [[Plus:Dialog_DatabaseWindows | <B>Database Windows - Edit Catalogue</B>]]<BR> Add or edit a database catalogue.
&nbsp;<BR>
&nbsp;<BR>
* [[1D:Dialog_OptionsResultData | <B>Result Data</B>]]<BR> Exclude the calculated courses/profiles or the film data from being saved in the project file.<BR>
* [[Plus:Dialog_DatabaseEmissionSources | '''Database Emission Sources''']]<BR> View the emission sources data contained in the emission sources database or add your own emission source.
** [[Plus:Dialog_DatabaseEmissionSourcesNew | <B>Database Emission Sources - New Emission Source </B>]]<BR> Define a new emission source for inclusion in WUFI's emission sources database.
** [[Plus:Dialog_DatabaseEmissionSourcesNew | <B>Database Emission Sources - Change Emission Sources</B>]]<BR> Edit one of the emission sources you have added to the database. (The predefined emission sources in the database cannot be edited.)
** <B>Database Emission Sources - Delete</B><BR> Delete from the database one of the emission source you have added. (The predefined emission sources in the database cannot be deleted.)
** [[Plus:Dialog DatabaseEmissionSourcesNew#Edit catalugue | <B>Database Emission Sources - Edit Catalogue</B>]]<BR> Add or edit a database catalogue.
&nbsp;<BR>
&nbsp;<BR>


=== Database ===
=== Help: ===
 
[[Bild:MenuDatabase-1D.gif]]
 
* [[1D:Dialog_DatabaseMaterials | <B>Database Materials</B>]]<BR> View the material data contained in the materials database or add your own materials.
** [[1D:Dialog_DatabaseMaterialsNew | <B>Database Materials - New Material</B>]]<BR> Define a new material for inclusion in WUFI's materials database.
** [[1D:Dialog_DatabaseMaterialsNew | <B>Database Materials - Change Material</B>]]<BR> Edit one of the materials you have added to the database. (The predefined materials in the database cannot be edited.)
** <B>Database Materials - Delete</B><BR> Delete from the database one of the materials you have added. (The predefined materials in the database cannot be deleted.)
** [[1D:Dialog_DatabaseMaterials | <B>Database Materials - Edit Catalog</B>]]<BR> Add or edit a database catalog.
 
* [[1D:Dialog_DatabaseConstructions | <B>Database Constructions</B>]]<BR> View the constructions contained in the constructions database or add your own constructions.
** [[1D:Dialog_DatabaseConstructionsNew | <B>Database Constructions - New Construction</B>]]<BR> Define a new construction for inclusion in WUFI's constructions database.
** [[1D:Dialog_DatabaseConstructionsNew | <B>Database Constructions - Change Construction</B>]]<BR> Edit one of the constructions you have added to the database. (The predefined constructions in the database cannot be edited.)
** <B>Database Constructions - Delete</B><BR> Delete from the database one of the constructions you have added. (The predefined constructions in the database cannot be deleted.)
** [[1D:Dialog_DatabaseConstructions | <B>Database Constructions - Edit Catalog</B>]]<BR> Add or edit a database catalog.<BR>
 
=== ? ===


[[Bild:MenuHelp-1D.gif]]
<B>About WUFI</B><BR> Displays information about WUFI, including the version number.
 
<P>
The on-line help.
</P>
 
* <B>General</B><BR> Opens the [[Welcome.htm">welcome page]] of the on-line help. You can use the arrows on each page to systematically browse the help topics.
* <B>Content</B><BR> Opens the <A HREF="Contents.htm">contents</A> page of the on-line help.
* <B>Index/Search</B><BR> Opens the keyword list of the on-line help for searching.
* <B>Use Help</B><BR> Explains how to use the on-line help.
* <B>IBP on the Web</B><BR> Opens the WUFI homepage in your browser.
* <B>WUFI Forum</B><BR> Opens the WUFI Forum in your browser.
* <B>About WUFI</B><BR> Displays information about WUFI, including the version number.


= Tool Bar =
= Tool Bar =
Zeile 166: Zeile 104:


[[Bild:ToolbarSaveProjectFile.gif]] Save Project File
[[Bild:ToolbarSaveProjectFile.gif]] Save Project File
[[Bild:ToolbarNewCase.gif]] Create New Case
[[Bild:ToolbarRemoveCase.gif]] Remove Case
[[Bild:ToolbarRunNoFilm.gif]] Run Calculation for current case without film display
[[Bild:ToolbarRunAllCases.gif]] Run Calculation for all cases in the project without film display
[[Bild:ToolbarRunWithFilm.gif]] [[1D:Dialog_RunCalculationWithFilm | Run Calculation with film display]]
[[Bild:ToolbarInputDataSummary.gif]] Show Summary of Input Data
[[Bild:ToolbarStatus.gif]] [[1D:Dialog_InfoLastCalculationRun | Show Status of Last Calculation]]
[[Bild:ToolbarResultGraphs.gif]] [[1D:Dialog_ResultGraphs | Show Result Graphs]]
[[Bild:ToolbarViewFilm.gif]] View Film
[[Bild:ToolbarOnlineHelp.gif]] Open On-Line Help

Aktuelle Version vom 28. Juni 2010, 08:36 Uhr

Overview of WUFI's Dialog Structure

This list contains a description of all menu items and of all dialogs, including dialogs which are not directly accessible via the menus, but as sub-dialogs of other dialogs:

Project:

WUFI-Plus Project.png

  • New

Wipes WUFI's memory clean and starts a new, empty project.
 
The project dialog opens which allows you to give a name to the project and which serves as a memo pad for some administrative project info.
 

  • Open

Displays the usual 'Open' dialog from which you can open existing project files (which contain the input data and the calculation results, if any).
 

  • Reopen

Displays a list of projects you have previously worked with so that you can easily open them by simply selecting them from this list.
 

  • Save

Saves the input data and (after a calculation has been performed) the calculation results to the project file.
 
You should save the project before a calculation in case something goes wrong; you must save again after the calculation if you want to keep the results for later.
 

  • Save As...

Saves the current project under a new name.
 
The old project file, if any, continues to exist under the old name.
 

  • Exit

Closes WUFI. But why should you want to?
 

Inputs:

WUFI-Plus Input2.png

  • Project
    Here you define all information of the project, includes the name and adress of the client and special remarks of the project.
  • Case 1
    Here you define general information about the project and the time of calculation. Additional the button results shows the report of the calculation which is available after the calculation.
  • HVAC
    This dialog includes the input mask for all data concerning the HVAC-System.

Options:

WUFI-Plus Options.png

 

  • Warnings
    Tell WUFI which events shall cause a warning.

 

  • Other
    Three options can be choose here.
    • Start the software window with a full screen.
    • Save the results with the project file.
    • Include all graphs in results.

 

 

  • Windows type
    Define default window types and save it in the Database.

Database:

WUFI-Plus Database.png

 

 

 

 

Help:

About WUFI
Displays information about WUFI, including the version number.

Tool Bar

The following menu items are also available via the toolbar buttons:

ToolbarNewProject.gif Create New Project

ToolbarOpenProjectFile.gif Open Project File

ToolbarSaveProjectFile.gif Save Project File

Abgerufen von „https://www.wufi-wiki.com/mediawiki/index.php?title=Plus:Dialogs&oldid=1701“