Passive:Dynamic Simulation

Switch to dynamic Mode

The Status and Result Box displays the status of the input e.g. if data is missing or unrealistic and if all information is given, a small portion of the results.
It can be minimized by clicking the grey X-button. This can be useful e.g. when reading the Results. The button then changes to a green arrow and by clicking whom, the box can be reestablished.

Set Boundary Conditions from Passive House

As long as there is still input data missing, the status and results box shows error messages. Double clicking on it makes WUFI®Passive jump to the cause of the error. The error messages are constructed according to the structure of the Navigation Tree, so navigating to the cause is just a matter of tracing the error message line by line in the Navigation Tree.