Aus Wufiwiki
Zur Navigation springenZur Suche springen

Once you have fed all information into WUFI®Passive, this page gives you the results and shows you how your building performs in terms of the passive verification standards.

You can find the Data & Result section by clicking on the Case button in the Tree.


Passive-result menu.png

The buttons in the menu work depending on which scope or which view you have chosen. Following 5 buttons work regardless of these options:

Passive-result expand.png The Expand/Shrink Button enlarges the result page on full screen or shrinks it back on the usual size.

Passive-result options.png The Option Button lets you chose the colors of the Passive House Verification result page. Default values are grey and white.

Passive-result whole.png Whole Width/Page: This option will allow you to either use the whole width of the window to display the results (Width), or show the whole page you are looking at (Page).

Passive-result zoom.png There is not a lot to explain for the Zoom Buttons.

  • Export in Word: This Button is not implemented yet.
  • Help: This Button is not implemented yet.

The other buttons are explained at the bottom of this page, in the section Print layout


Passive-result scope.png
  • Passive House Verification: Detailed results, shows whether your house satisfies the standards or not.
  • Project Data: Display of the information given in the Project section in the Tree.
  • Climate: Shows some basic information about the outer climate, which can be changed here.
  • Passive House Data: Passive House related information like building type, floor slab area, internal gains settings etc.
  • Zones/Components: Summary of all components and its adjacent zones. Some output values would be U-Value of each component or the tfa.
  • Assemblies: Overview on the assemblies used in the project. All important values on different layers and the whole assembly are displayed.
  • HVAC: Overview on the efficiency of the HVAC system.
  • Results: Summary of the most important building parameters, like heating demands/loads and U-Values.
  • User defined: Here you can chose your own composition of information to create a custom output report. Press this Passive-result sequence.png button and decide which results you would like in your report. The elements on the left are the displayed tabs. You can change them with drag'n'drop or the select all button. To finish your selection, press "OK".
Passive House Data

Print Layout

When chosing the Print Layout, WUFI®Passive will format the page you have currently selected into a print friendly format. It will also unlock 3 buttons, to either change the format or simple print the results.
Passive-result setup.png Page Setup: Paper size, top and side margins can be altered here. You can also set how WUFI deals with new topics/tables and new pages.
Passive-result print.png
Print all: Has the whole selected scope printed by your default printer.
Print dialog: Click here to open the print dialog. Select a printer. To change the printer options click the "Preferences" Button, "Find printer..." which opens a dialog box to help you find a printer that is able to meet the requirements. Also the page range and the number of copies can be altered here.