Passive:Dynamic Simulation: Unterschied zwischen den Versionen
Aus Wufiwiki
Zur Navigation springenZur Suche springen
SebSta (Diskussion | Beiträge) (Die Seite wurde neu angelegt: == Switch to dynamic Mode == The Status and Result Box displays the status of the input e.g. if data is missing or unrealistic and if all information is given, a small ...) |
SebSta (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 6: | Zeile 6: | ||
[[Bild:Passive-resultbox_error.png|left]] | [[Bild:Passive-resultbox_error.png|left]] | ||
Certain input parameters can be taken over from WUFI®Passive to WUFI®Plus. To simplify this step new a button "Set Boundary Conditions from Passive House" has been introduced. This option will set reasonable values for the dynamic simulation mode for better comparison of the results. | |||
<br style="clear:both" /> | <br style="clear:both" /> | ||
Version vom 17. Juli 2013, 11:42 Uhr
Switch to dynamic Mode
The Status and Result Box displays the status of the input e.g. if data is missing or unrealistic and if all information is given, a small portion of the results.
It can be minimized by clicking the grey X-button. This can be useful e.g. when reading the Results. The button then changes to a green arrow and by clicking whom, the box can be reestablished.
Set Boundary Conditions from Passive House
Certain input parameters can be taken over from WUFI®Passive to WUFI®Plus. To simplify this step new a button "Set Boundary Conditions from Passive House" has been introduced. This option will set reasonable values for the dynamic simulation mode for better comparison of the results.
