1D:Menu: Unterschied zwischen den Versionen
Aus Wufiwiki
Zur Navigation springenZur Suche springen
Len (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Len (Diskussion | Beiträge) |
||
| Zeile 34: | Zeile 34: | ||
explorer on the left side of the screen)<BR> | explorer on the left side of the screen)<BR> | ||
<BR> | <BR> | ||
* [[1D:Dialog_Assembly | <B>Assembly / Monitor Positions</B>]]<br> | * [[1D:Dialog_Assembly | <B>Assembly / Monitor Positions</B>]]<br> Here you define the [[Glossary:Glossary-1D | assembly]] of the [[Glossary:Glossary-1D | building component]] by specifying the layer sequence and the layer thicknesses as well as the [[Details:Material | material parameters]] of the individual layers.<BR> | ||
Here you define the [[Glossary:Glossary-1D | assembly]] of the [[Glossary:Glossary-1D | building component]] by specifying the layer sequence and the layer thicknesses as well as the [[Details:Material | material parameters]] of the individual layers.<BR> | |||
* [[1D:Dialog_Orientation | <B>Orientation / Inclination / Height</B>]]<br> This dialog serves to define the orientation, inclination and height of the building component. | * [[1D:Dialog_Orientation | <B>Orientation / Inclination / Height</B>]]<br> This dialog serves to define the orientation, inclination and height of the building component. | ||
* [[1D:Dialog_SurfaceTransferCoefficients | <B>Surface Transfer Coefficients</B>]]<BR> | * [[1D:Dialog_SurfaceTransferCoefficients | <B>Surface Transfer Coefficients</B>]]<BR> In this dialog you define the [[Details:Surface | surface transfer coefficients]], such as the [[Details:HeatTransfer | heat transfer coefficient]], the [[Details:ShortWave | radiation absorptivity]], [[Details:RainReductionFactor | rain reduction factor]] etc.<BR> | ||
In this dialog you define the [[Details:Surface | surface transfer coefficients]], such as the [[Details:HeatTransfer | heat transfer coefficient]], the [[Details:ShortWave | radiation absorptivity]], [[Details:RainReductionFactor | rain reduction factor]] etc.<BR> | * [[1D:Dialog_InitialConditions | <B>Initial Conditions</B>]]<BR> The initial temperature and moisture distributions are specified in this dialog (e.g. a dry component or one with trapped construction moisture). | ||
* [[1D:Dialog_InitialConditions | <B>Initial Conditions</B>]]<BR> | * [[1D:Dialog_Time | <B>Calculation Period / Profiles</B>]]<BR> Here you tell WUFI for which period of time the simulation shall be carried out (e.g. the simulation is to span one year, starting on June 1st). | ||
The initial temperature and moisture distributions are specified in this dialog (e.g. a dry component or one with trapped construction moisture). | * [[1D:Dialog_Numerics | <B>Numerics</B>]]<BR> The options offered by this dialog allow you to control the way the calculation is done.<BR> | ||
* [[1D:Dialog_Time | <B>Calculation Period / Profiles</B>]]<BR> | |||
Here you tell WUFI for which period of time the simulation shall be carried out (e.g. the simulation is to span one year, starting on June 1st). | |||
* [[1D:Dialog_Numerics | <B>Numerics</B>]]<BR> | |||
The options offered by this dialog allow you to control the way the calculation is done.<BR> | |||
* [[1D:Dialog_Climate | <B>Climate: Outdoor (Left Side)</B>]] | * [[1D:Dialog_Climate | <B>Climate: Outdoor (Left Side)</B>]] | ||
* [[1D:Dialog_Climate | <B>Climate: Indoor (Right Side)</B>]]<BR> | * [[1D:Dialog_Climate | <B>Climate: Indoor (Right Side)</B>]]<BR> These dialogs serve to specify the [[Details:Climate | weather]] acting on the left or right side of the component, respectively. | ||
These dialogs serve to specify the [[Details:Climate | weather]] acting on the left or right side of the component, respectively. | |||
Version vom 30. September 2008, 09:43 Uhr
Overview of WUFI's Menu Structure
This list contains a description of all menu items.
Menu: Project
- New Project
Wipes WUFI's memory clean and starts a new, empty project.
- New Case
Creates a new case within the current project.
- Remove Selected Case
Serves to delete cases which are not needed any more.
- Open
Displays the usual 'Open' dialog from which you can open existing project files (which contain the input data and the calculation results, if any).
- Reopen
Displays a list of projects you have previously worked with so that you can easily open them by simply selecting them from this list.
- Save
Saves the input data and (after a calculation has been performed) the calculation results to the project file.
- Save As...
Saves the current project under a new name.
- Close
Closes WUFI-1D.
Menu: Inputs
(these dialogs are also directly accessible from the project
explorer on the left side of the screen)
- Assembly / Monitor Positions
Here you define the assembly of the building component by specifying the layer sequence and the layer thicknesses as well as the material parameters of the individual layers. - Orientation / Inclination / Height
This dialog serves to define the orientation, inclination and height of the building component. - Surface Transfer Coefficients
In this dialog you define the surface transfer coefficients, such as the heat transfer coefficient, the radiation absorptivity, rain reduction factor etc. - Initial Conditions
The initial temperature and moisture distributions are specified in this dialog (e.g. a dry component or one with trapped construction moisture). - Calculation Period / Profiles
Here you tell WUFI for which period of time the simulation shall be carried out (e.g. the simulation is to span one year, starting on June 1st). - Numerics
The options offered by this dialog allow you to control the way the calculation is done. - Climate: Outdoor (Left Side)
- Climate: Indoor (Right Side)
These dialogs serve to specify the weather acting on the left or right side of the component, respectively.
