Suchergebnisse

Übereinstimmungen mit Seitentiteln

• Plus 2.X:Other Parameters
  948 Bytes (148 Wörter) - 08:06, 1. Jun. 2011

Übereinstimmungen mit Inhalten

• Passive2:PH case
  === Parameters === === Parameters ===
  4 KB (649 Wörter) - 09:27, 10. Jun. 2014
• Plus 2.X: Not Visualized Components
  …he simulation. The definition of these components and their properties and parameters is the same as that of the [[Plus 2.X:Visualized_Components|Visualized Comp
  530 Bytes (79 Wörter) - 11:35, 26. Mär. 2012
• Plus2:Movies
  …filme/Plus/Plus_window_data.mp4 Assigning window types and changing window parameters] …filme/Plus/Plus_components.mp4 Implementing opaque components and altering parameters]
  2 KB (294 Wörter) - 15:00, 7. Dez. 2023
• Passive2:Visualized Components
  …s for each side of the frame. These values can either be defined by window parameters or defined by user by removing the tick.<br> === Window parameters ===
  5 KB (748 Wörter) - 22:58, 22. Mai 2014
• Plus 2.X:Tree
  *****[[Plus 2.X:Other_Parameters|Other Parameters]]
  1 KB (155 Wörter) - 09:14, 26. Mär. 2012
• Passive:Verification
  …erification output report. There will be a short description of the output parameters for each section as well as a screenshot. The energy demand of all other electric devices is listed here.<br style="clear:both" />
  8 KB (1.144 Wörter) - 09:38, 10. Jun. 2014
• Plus 2.X:Visualized Components
  …" and "Parameters” inform about component data that can be adjusted in the other tabs. If "Group Components" was check marked in the [[Plus 2.X:Building_Wizard#Other Options|Building Wizard]] components of the same type are automatically ass
  13 KB (2.152 Wörter) - 15:52, 27. Mär. 2012
• Plus 2.X:Dialog Climate
  …s possible. The file-based climate must now be assigned to the appropriate parameters. Therefore, the data previously stored in "Files/Measured Data" will be sel *ASHRAE 160 (ANSI / ASHRAE 160 2009): The parameters that can be determined by ASHRAE 160 are extensive. In the field of tempera
  6 KB (904 Wörter) - 15:50, 27. Mär. 2012
• Passive:Dynamic Simulation
  Certain input parameters can be carried over from WUFI®Passive to WUFI®Plus mode. To simplify this
  2 KB (309 Wörter) - 12:04, 4. Jun. 2014
• Plus 2.X:Wufi Plus 2.X
  …sembly, the input of different boundary conditions as well as variances of parameters like material characteristics.
  3 KB (470 Wörter) - 11:32, 29. Jun. 2011
• Plus 2.X:First Steps
  Basically, the [[Plus 2.X:Dialog_Climate|climatic parameters]], i.e. weather, influencing the simulated building can be defined here. If Besides the “Assembly” there are various other aspects concerning the vertical walls that need to be specified.
  23 KB (3.666 Wörter) - 09:52, 4. Jul. 2013
• Passive:Results
  The other buttons are explained at the bottom of this page, in the section [[Passive: * '''Results''': Summary of the most important building parameters, like heating demands/loads and U-Values.
  4 KB (610 Wörter) - 16:51, 20. Mai 2014
• Plus 2.X:Input
  …f utilization in our building; one part of it is used as living space, the other as fitness studio. Therefore the upcoming loads and requirements concerning There are other tools to help you assigning the right attachment.
  30 KB (4.915 Wörter) - 07:50, 29. Mär. 2012
• Plus 2.X:Results
  …''' Overview on important information you entered for the zones (geometry, other parameter, accuracy...) and the components (geometry, surface, numerics...) There are three blocks on top of each other on the left side, the uppermost is the '''pages block''' where a list of al
  18 KB (3.063 Wörter) - 08:18, 29. Mär. 2012