Plus 2.X:Tree: Unterschied zwischen den Versionen
Aus Wufiwiki
Zur Navigation springenZur Suche springen
Krizzl (Diskussion | Beiträge) |
Krizzl (Diskussion | Beiträge) |
||
| Zeile 12: | Zeile 12: | ||
****Zone 1 | ****Zone 1 | ||
*****[[Plus 2.X:Visualized_Components|Visualized Components]] | *****[[Plus 2.X:Visualized_Components|Visualized Components]] | ||
*****Not Visualized Components | *****[[Plus 2.X: Not_Visualized_Components|Not Visualized Components]] | ||
*****[[Plus 2.X:Inner_Loads|Inner Loads/Occupancy]] | *****[[Plus 2.X:Inner_Loads|Inner Loads/Occupancy]] | ||
*****Design Conditions | *****Design Conditions | ||
Version vom 26. April 2011, 13:06 Uhr
The Navigation Tree is a helpful instrument to navigate while editing the inputs. It is advisable to follow its structure while working on a project so as not to forget any important input.
The project is divided in Cases. In these cases are the elements climate and building.The building is divided further in zones and attached zones.
- Project
- Files/Measured Data
- Case 1
- Climate
- Building
- Heated Zones
- Zone 1
- Visualized Components
- Not Visualized Components
- Inner Loads/Occupancy
- Design Conditions
- Other Parameters
- Zone 1
- Attached Zones
- 3D-Objects
- Remaining Elements
- Heated Zones
- HVAC
