Plus 2.X:Attached Zones: Unterschied zwischen den Versionen
Aus Wufiwiki
Zur Navigation springenZur Suche springen
Krizzl (Diskussion | Beiträge) (Die Seite wurde neu angelegt: == Attached Zones == left Attached areas are all areas that do not belong to the simulation volume, for example an unheated a...) |
Krizzl (Diskussion | Beiträge) |
||
| Zeile 5: | Zeile 5: | ||
Attached areas are all areas that do not belong to the simulation volume, for example an unheated attic. They influence, however, the conditions in the simulation area and must be precisely defined. The adjacent zones can be named and the type of the zones can be selected in the drop-down menu. For each zone in the next lower level the climate can be selected. The user has the choice between the previously in dialog "Climate" defined external or optional climates. | Attached areas are all areas that do not belong to the simulation volume, for example an unheated attic. They influence, however, the conditions in the simulation area and must be precisely defined. The adjacent zones can be named and the type of the zones can be selected in the drop-down menu. For each zone in the next lower level the climate can be selected. The user has the choice between the previously in dialog "Climate" defined external or optional climates. | ||
For more information on zones click [[Plus 2.X:Zones|here]] | |||
Version vom 29. April 2011, 11:47 Uhr
Attached Zones
Attached areas are all areas that do not belong to the simulation volume, for example an unheated attic. They influence, however, the conditions in the simulation area and must be precisely defined. The adjacent zones can be named and the type of the zones can be selected in the drop-down menu. For each zone in the next lower level the climate can be selected. The user has the choice between the previously in dialog "Climate" defined external or optional climates.
For more information on zones click here
