Plus:Installation: Unterschied zwischen den Versionen
(Die Seite wurde neu angelegt: = Installing WUFI Plus = This page describes the process of installing WUFI Plus and the folders that are created.) |
Len (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 1: | Zeile 1: | ||
= Installing WUFI Plus = | = Installing WUFI Plus = | ||
The menu-driven PC program '''WUFI®''' ('''W'''ärme '''u'''nd '''F'''euchte '''i'''nstationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions. | |||
WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials. | |||
'''WUFI®''' only requires standard material properties and easy-to-determine moisture storage and liquid transport functions. | |||
'''WUFI®''' can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather. | |||
'''WUFI® can be used for assessing''' | |||
* the indoor climate conditions depending on how the building is used | |||
* the energy consumption for heating, cooling and ventilation | |||
* the danger of interstitial condensation | |||
* the effect of repair and retrofit measures to the indoor climate | |||
* the hygrothermal performance of roof and wall assemblies under defined use or in different climate zones. | |||
== Computer Requirements: == | |||
* IBM-compatible Pentium-class computer. High speed is recommended for performance. | |||
* At least 512 MB of random access memory (RAM). | |||
* Microsoft Windows XPTM | |||
* Hard disk drive with at least 100 megabytes of available disk space. | |||
* Additional 500 megabytes for the calculation results | |||
== Installing the Program: == | |||
In order to install WUFI-Plus you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions. | |||
Version vom 8. August 2008, 13:02 Uhr
Installing WUFI Plus
The menu-driven PC program WUFI® (Wärme und Feuchte instationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions. WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials.
WUFI® only requires standard material properties and easy-to-determine moisture storage and liquid transport functions.
WUFI® can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather.
WUFI® can be used for assessing
- the indoor climate conditions depending on how the building is used
- the energy consumption for heating, cooling and ventilation
- the danger of interstitial condensation
- the effect of repair and retrofit measures to the indoor climate
- the hygrothermal performance of roof and wall assemblies under defined use or in different climate zones.
Computer Requirements:
- IBM-compatible Pentium-class computer. High speed is recommended for performance.
- At least 512 MB of random access memory (RAM).
- Microsoft Windows XPTM
- Hard disk drive with at least 100 megabytes of available disk space.
- Additional 500 megabytes for the calculation results
Installing the Program:
In order to install WUFI-Plus you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions.
