Plus:Installation: Unterschied zwischen den Versionen

Aus Wufiwiki
Zur Navigation springenZur Suche springen
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
= Installing WUFI Plus =
= Installing WUFI Plus =


The menu-driven PC program '''WUFI®''' ('''W'''ärme '''u'''nd '''F'''euchte '''i'''nstationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of multi-layer building components exposed to natural climate conditions.
The menu-driven PC program '''WUFI®plus''' ('''W'''ärme '''u'''nd '''F'''euchte '''i'''nstationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of a buildung exposed to natural climate conditions.  
WUFI® is based on the newest findings regarding vapour diffusion and liquid transport in building materials.
 
'''WUFI®''' only requires standard material properties and easy-to-determine moisture storage and liquid transport functions.
 
'''WUFI®''' can use measured weather data - including driving rain and solar radiation - as boundary conditions, thus allowing realistic investigations on the behaviour of the component under exposure to natural weather.
 
'''WUFI® can be used for assessing'''
* the indoor climate conditions depending on how the building is used
* the energy consumption for heating, cooling and ventilation
* the danger of interstitial condensation
* the effect of repair and retrofit measures to the indoor climate
* the hygrothermal performance of roof and wall assemblies under defined  use or in different climate zones.  


== Computer Requirements: ==
== Computer Requirements: ==

Version vom 11. Oktober 2010, 10:39 Uhr

Installing WUFI Plus

The menu-driven PC program WUFI®plus (Wärme und Feuchte instationär - Transient Heat and Moisture), developed by IBP and validated using data derived from outdoor and laboratory tests, allows realistic calculation of the transient hygrothermal behaviour of a buildung exposed to natural climate conditions.

Computer Requirements:

  • IBM-compatible Pentium-class computer. High speed is recommended for performance.
  • At least 512 MB of random access memory (RAM).
  • Microsoft Windows XPTM
  • Hard disk drive with at least 100 megabytes of available disk space.
  • Additional 500 megabytes for the calculation results

Installing the Program:

In order to install WUFI-Plus you need to have the system administrator rights. Put the program installation CD in the appropriate CD drive and follow the instructions.

Abgerufen von „https://www.wufi-wiki.com/mediawiki/index.php?title=Plus:Installation&oldid=1801“