Quelltext der Seite 2D:Dialogs

= Overview of WUFI's Dialog Structure =

<P>
This list contains a description of all menu items and of all dialogs,
including dialogs which are not directly accessible via the menus,
but as sub-dialogs of other dialogs:
</P>

== WUFI-2D: ==

=== File: ===
[[Bild:MenuFile.gif]]
<TABLE>
<TR><TD>&bull;&nbsp;</TD><TD><B>New</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Wipes WUFI's memory clean and starts
                       a new [[2D:Glossary | project]].
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Open Project...</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Displays a dialog in which you can specify the
                       [[2D:Glossary | directory]]
                       where your [[2D:Glossary | project
                       data]] reside.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Revert to last saved</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Reverts the project to its last version saved in the
                       [[2D:Glossary | cache directory]],
                       thus providing a rudimentary undo function.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Save</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Saves the [[2D:Glossary | project data]]
                       to the [[2D:Glossary | save directory]].
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Save Project As...</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Asks for a [[2D:Glossary | save directory]]
                       and writes the [[2D:Glossary | project data]]
                       there.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Import...</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Imports archived project files.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Export...</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Creates an archive file from your project data.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Exit</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Closes WUFI-2D.
                       </TD></TR>
</TABLE>


=== Input: ===
[[Bild:MenuInput.gif]]
<TABLE>
<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogProject | <B>Project</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>This dialog can be used as a memo pad for some
administrative [[2D:Glossary | project]] info.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogGeometry | <B>Geometry</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Here you define the geometry of the [[2D:Glossary | component]]
by assembling it from rectangular elements.

 <TABLE>
  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogPageSetup | <B>Page Setup</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to define the home position and the default magnification for the component graphics.</TD></TR>
  <TR><TD>&bull;&nbsp;</TD><TD><B>Load From File</B></TD></TR>
  <TR><TD>&nbsp;</TD><TD>Load a PostScript file describing the geometry of the component</TD></TR>

  <TR><TD>&bull;&nbsp;</TD><TD><B>Save To File</B></TD></TR>
  <TR><TD>&nbsp;</TD><TD>Save the script describing the geometry as a PostScript file.<BR>&nbsp;</TD></TR>
  </TABLE>

</TD></TR>


<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogGrid | <B>Grid</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Specify the numerical grid for the component.
  <TABLE>

  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogPageSetup | <B>Page Setup</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to define the home position and the default magnification for the component graphics.</TD></TR>
  </TABLE>
</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogMaterials | <B>Materials</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Assign material properties to the different elements of the component.

  <TABLE>
  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogPageSetup | <B>Page Setup</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to define the home position and the default
                         magnification for the component graphics.</TD></TR>

  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogAllocationOfPropertiesMaterial | <B>Allocation of Properties (Material)</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>This dialog displays a list of materials that have so far been
                         assigned to different elements of the component. You can assign
                         an existing material to the component, add new materials you want
                         to assign to the component, and edit the properties of existing
                         materials.
    <TABLE>
    <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogMaterialDatabase | <B>Material Database</B>]]</TD></TR>
    <TR><TD>&nbsp;</TD><TD>You can select a new material from the material
                           database.</TD></TR>

    <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogEditMaterial | <B>Material Properties</B>]]</TD></TR>
    <TR><TD>&nbsp;</TD><TD>You can edit the properties of a material to better
                           suit your needs.</TD></TR>
    </TABLE>
  </TD></TR>

  </TABLE>
</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogInitialConditions | <B>Initial Conditions</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Specify the temperatures and relative humidities existing in the different elements of the component at the start of the component.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogSurfaceClimate | <B>Surface/Climate</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Assign surface coefficients and climatic boundary conditions to the different surface segments of the component.

  <TABLE>
  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogPageSetup | <B>Page Setup</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to define the home position and the default
                         magnification for the component graphics.
                         </TD></TR>

  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogAllocationOfPropertiesSurfaceClimate | <B>Allocation of Properties (Surface/Climate)</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>This dialog displays a list of surface coefficients and climatic
                         conditions that have so far been assigned to different surface
                         segments of the component. You can assign a list entry to a surface
                         segment of the component, add new list entries or edit existing ones.
  
    <TABLE>
    <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogEditSurfaceCoefficients | <B>Edit Surface Coefficients</B>]]</TD></TR>
    <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogEditClimate | <B>Edit Climate</B>]]</TD></TR>
    <TR><TD>&nbsp;</TD><TD>You can edit the surface coefficients and select the climate
                           to be assigned to a surface segment of the component.

      <TABLE>
      <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogSelectClimate | <B>Select Climate</B>]]</TD></TR>
      <TR><TD>&nbsp;</TD><TD>Select the climate to be assigned to a surface
                             segment. You may use measured climate data, schematic
                             sine curves or interior climates derived from exterior
                             climate data.
        <TABLE>
        <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogClimateFileSelectMap | <B>Select Climate File (from map)</B>]]</TD></TR>
        <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogClimateFileSelectFile | <B>Select Climate File (File Browser)</B>]]</TD></TR>
        <TR><TD>&nbsp;</TD><TD>If you want to read the climate data from a file, you
                               can select the file from a map (for files included
                               with WUFI) or with a file browser (for files provided
                               by yourself).
                               </TD></TR>

        <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogClimateFileDetails | <B>Detailed Options</B>]]</TD></TR>
        <TR><TD>&nbsp;</TD><TD>If you are reading the climate data from a file, you may
                               make use of special options provided by some file formats.
                               </TD></TR>
        </TABLE>
      </TD></TR>
      </TABLE>
    </TD></TR> 
    </TABLE>
  </TD></TR>
  </TABLE>
</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogComputationalParameters | <B>Computational Parameters</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>The options offered in this dialog allow you to control
                       the way the calculation is done.
                       </TD></TR>
</TABLE>


=== Processing: ===
[[Bild:IconDialogProcessing_1.gif]]
<TABLE>
<TR><TD>&nbsp;</TD><TD>Click <FONT FACE="COURIER NEW">Start</FONT> to [[2D:DialogProcessing | run the calculation]]. You may <FONT FACE="COURIER NEW">Suspend</FONT> or <FONT FACE="COURIER NEW">Terminate</FONT>
                       the calculation at any time; the results accumulated so far remain
                       accessible and can be analysed.

  <TABLE>
  <TR><TD>&bull;&nbsp;</TD><TD><B>Edit Input File</B></TD></TR>
  <TR><TD>&nbsp;</TD><TD>WUFI experts may edit the input file which transfers all
                         the input data to WUFI's numerical processor.
                         </TD></TR>
  </TABLE>

</TD></TR>
</TABLE>


=== Output: ===
[[Bild:MenuOutput.gif]]
<TABLE>
<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogResultAnalyzer | <B>View the Results</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Launches the program WUFI2Dmotion which displays the results
                       as animated 3D graphs.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>View the Results (1D)</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Launches a program which allows you to select regions of interest
                       in the component and to analyse the temporal behavior of
                       the mean temperatures, humidities etc. in this region.
                       </TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>View Report</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>Creates a report detailing all the project data and launches
                       the web browser to display it.
                       </TD></TR>
</TABLE>


=== Database: ===
[[Bild:MenuDatabase.gif]]
<TABLE> 

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogDatabaseMaterials | <B>Material</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>The material database dialog allows you to browse the material
                       database and to create new catalogs and materials.

  <TABLE>
  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogDatabaseMaterialsEditCatalog | <B>Edit Catalog</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to create a new catalog
                         for user-defined materials
                         </TD></TR>

  <TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogDatabaseMaterialsNewMaterial | <B>New Material</B>]]</TD></TR>
  <TR><TD>&nbsp;</TD><TD>Use this dialog to create a new
                         material.
                         </TD></TR>
  </TABLE>

</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Constructions</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>The database also contains a collection of one-dimensional
                       building components. In WUFI-2D these are currently not accessible.
                       </TD></TR>
</TABLE>


=== Options: ===
[[Bild:MenuOptions.gif]]
<TABLE>
<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogOptionsSettings | <B>Settings</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Specify the [[2D:Glossary | cache directory]] in which you are working, the [[2D:Glossary | home directory]] for saving [[2D:Glossary | projects]], the database language and a few other settings.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Set As Default</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>This option allows you to define the current project as the [[2D:Glossary | default project]].</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Reset Default</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>This option resets a previous definition of a [[2D:Glossary | default project]].</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogOptionsAdministrateModules | <B>Administrate Modules</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>(This menu item is currently not used)</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogOptionsExport | <B>Export...</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>Creates a self-extracting compressed file containing the result file and the result viewer WUFI-2D Motion.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD>[[2D:DialogOptionsCustomize | <B>Customize</B>]]</TD></TR>
<TR><TD>&nbsp;</TD><TD>(This menu item is currently not used)</TD></TR>

</TABLE>

=== Help: ===
[[Bild:MenuHelp.gif]]
<TABLE>
<TR><TD>&bull;&nbsp;</TD><TD><B>Contents</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>This menu item opens the contents dialog of the on-line help system.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>Topic Search</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>This menu item opens the keyword search dialog of the on-line help system.</TD></TR>

<TR><TD>&bull;&nbsp;</TD><TD><B>About</B></TD></TR>
<TR><TD>&nbsp;</TD><TD>This menu item displays the version number of WUFI-2D.</TD></TR>
</TABLE>

== WUFI-2D Motion: ==

<P>
There is currently only a
[[2D:DialogResultAnalyzer | very short description]] of the
WUFI-2D Motion program for visualizing the calculation results.
</P>