Plus:HowTo

Aus Wufiwiki
Zur Navigation springenZur Suche springen

Simulation procedure

This is a short description of a simulation procedure. For detailed information to the several steps follow the links.


The elements of the navigation tree lead you step by step through all the necessary inputs.


Start with the definition of the general project information


Are additional data or files are needed, load it into the programm


remark all alterations and characteristics of the current case variation define the simulation period


Choose a climate for the boundary conditions. This can be either from the WUFIplus database or a user defined one Additional optional climates can be defined (e.g. ground, attached zones)


modelling the building. For plain geometries the building wizard can be used. It generates the geometry with a few inputs. For more complex geometries use the 3D Editor.


Create the several heated zones


Define the stettings for the several zones.


allocate the components to the respective zone define the assemblies set the parameters for surface, initial conditions and numeric


occuring inner loads by machines or occupants can be defined by the hour


design conditions for the zone are defined by the hour as well. these values are setpoints for the HVAC system









How Do I Use WUFI Plus?

The following will guide you through the process of setting up and performing a calculation with WUFI Plus, giving you a general impression of what you can do and how you can do it.