Plus:HowTo: Unterschied zwischen den Versionen
Tes (Diskussion | Beiträge) |
Tes (Diskussion | Beiträge) |
||
| Zeile 31: | Zeile 31: | ||
Remark all alterations and characteristics of the current case variation and define the simulation period. | Remark all alterations and characteristics of the current case variation and define the simulation period. | ||
[[Bild:Procedure_Case.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:Dialog Climate|Climate]] | [[Plus:Dialog Climate|Climate]] | ||
| Zeile 37: | Zeile 39: | ||
Additional optional climates can be defined (e.g. ground, attached zones). | Additional optional climates can be defined (e.g. ground, attached zones). | ||
[[Bild:Procedure_Climate.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:TreeBuilding|Building]] | [[Plus:TreeBuilding|Building]] | ||
| Zeile 44: | Zeile 48: | ||
For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'. | For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'. | ||
[[Bild:Procedure_Building.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:TreeZones|Heated Zones]] | [[Plus:TreeZones|Heated Zones]] | ||
| Zeile 49: | Zeile 55: | ||
Create the several heated zones within the simulation envelope. | Create the several heated zones within the simulation envelope. | ||
[[Bild:Procedure_HeatedZones.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:TreeHeatedZones|Zone]] | [[Plus:TreeHeatedZones|Zone]] | ||
| Zeile 54: | Zeile 62: | ||
Make the stettings for the several zones. | Make the stettings for the several zones. | ||
[[Bild:Procedure_Zone.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:Visualized Components|Visualized Components]] | [[Plus:Visualized Components|Visualized Components]] | ||
| Zeile 63: | Zeile 73: | ||
Set the parameters for surface, initial conditions and numerics. | Set the parameters for surface, initial conditions and numerics. | ||
[[Bild:Procedure_Component.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:Inner Loads|Inner Loads]] | [[Plus:Inner Loads|Inner Loads]] | ||
| Zeile 68: | Zeile 80: | ||
The occuring inner loads by machines or occupants can be defined in profiles by the hour. | The occuring inner loads by machines or occupants can be defined in profiles by the hour. | ||
[[Bild:Procedure_InnerLoads.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:Design Conditions|Design Conditions]] | [[Plus:Design Conditions|Design Conditions]] | ||
| Zeile 75: | Zeile 89: | ||
These values are setpoints for the HVAC system. | These values are setpoints for the HVAC system. | ||
[[Bild:Procedure_DesignConditions.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:Other Parameters|Other Parameters]] | [[Plus:Other Parameters|Other Parameters]] | ||
| Zeile 80: | Zeile 96: | ||
To start the calculation the initial conditions have to be defined. | To start the calculation the initial conditions have to be defined. | ||
[[Bild:Procedure_OtherParameters.jpg|left]] | |||
<br style="clear:both" /> | |||
[[Plus:HVAC - Heating, Ventilating, Air Conditioning|HVAC]] | [[Plus:HVAC - Heating, Ventilating, Air Conditioning|HVAC]] | ||
| Zeile 86: | Zeile 103: | ||
Constitute the capability of the projected HVAC system. | Constitute the capability of the projected HVAC system. | ||
[[Bild:Procedure_HVAC.jpg|left]] | |||
<br style="clear:both" /> | |||
Calculation | Calculation | ||
| Zeile 91: | Zeile 110: | ||
The completeness of the inputs is shown in the state bar with the green button. | The completeness of the inputs is shown in the state bar with the green button. | ||
[[Bild:Procedure_Calculation.jpg|left]] | |||
<br style="clear:both" /> | |||
Results | |||
[[Bild:Procedure_Results.jpg|left]] | |||
<br style="clear:both" /> | |||
Version vom 13. Oktober 2010, 09:54 Uhr
Simulation procedure
This is a short description of a simulation procedure.
For detailed information to the several steps follow the links.
The elements in the navigation tree lead you step by step through all necessary inputs.
Start with the definition of the general project information.
Are additional data or files are needed for the calculation, load it into the programm.
Remark all alterations and characteristics of the current case variation and define the simulation period.
Select the boundary conditions. This can be either a climate from the WUFIplus database or user defined. Additional optional climates can be defined (e.g. ground, attached zones).
Model the simulation building.
For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'.
Create the several heated zones within the simulation envelope.
Make the stettings for the several zones.
Allocate the components to the respective zone.
Define and asign the assemblies.
Set the parameters for surface, initial conditions and numerics.
The occuring inner loads by machines or occupants can be defined in profiles by the hour.
The design conditions for the zone are defined by the hour as well.
These values are setpoints for the HVAC system.
To start the calculation the initial conditions have to be defined.
Constitute the capability of the projected HVAC system.
Calculation
The completeness of the inputs is shown in the state bar with the green button.
Results
