Plus:HowTo: Unterschied zwischen den Versionen

Aus Wufiwiki
Zur Navigation springenZur Suche springen
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
= Simulation procedure =
= Simulation procedure =


Zeile 94: Zeile 93:


[[Plus:HVAC - Heating, Ventilating, Air Conditioning|HVAC]]
[[Plus:HVAC - Heating, Ventilating, Air Conditioning|HVAC]]
= How Do I Use WUFI Plus? =
The following will guide you through the process of setting up
and performing a calculation with WUFI Plus, giving you a general
impression of what you can do and how you can do it.
* [[Plus:CollectingTheNecessaryData | Collecting the Necessary Data]]
* [[Plus:DefiningTheComponentAndTheNumericalGrid | Defining the Component and the Numerical Grid]]
* [[Plus:SettingNumericalParameters | Setting Numerical Parameters]]
* [[Plus:SummaryPreparingACalculation |Summary: Preparing a Calculation]]
* [[Plus:PerformingTheCalculation | Performing the Calculation]]
* [[Plus:ViewingTheResults | Viewing the Results]]

Version vom 11. Oktober 2010, 14:19 Uhr

Simulation procedure

This is a short description of a simulation procedure.

For detailed information to the several steps follow the links.


The elements of the navigation tree lead you step by step through all the necessary inputs.


WUFI-PlusNavigationTree1.jpg



Project

Start with the definition of the general project information.


Files / Measured data

Are additional data or files are needed for the calculation, load it into the programm.


Case

Remark all alterations and characteristics of the current case variation and define the simulation period.


Climate

Select the boundary conditions. This can be either a climate from the WUFIplus database or user defined. Additional optional climates can be defined (e.g. ground, attached zones).


Building

Model the simulation building.

For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'.


Heated Zones

Create the several heated zones within the simulation envelope.


Zone

Make the stettings for the several zones.


Visualized Components

Allocate the components to the respective zone.

Define and asign the assemblies.

Set the parameters for surface, initial conditions and numerics.


Inner Loads

The occuring inner loads by machines or occupants can be defined in profiles by the hour.


Design Conditions

The design conditions for the zone are defined by the hour as well.

These values are setpoints for the HVAC system.


Other Parameters



Attached Zones



3D-Objects



Remaining elements



HVAC