Plus:HowTo: Unterschied zwischen den Versionen
Tes (Diskussion | Beiträge) |
Tes (Diskussion | Beiträge) |
||
| Zeile 16: | Zeile 16: | ||
[[Plus:Dialog Project|Project]] | [[Plus:Dialog Project|Project]] | ||
Start with the definition of the general project information | Start with the definition of the general project information. | ||
[[Plus:Dialog Files / Measured data|Files / Measured data]] | [[Plus:Dialog Files / Measured data|Files / Measured data]] | ||
Are additional data or files are needed for the calculation, load it into the programm | Are additional data or files are needed for the calculation, load it into the programm. | ||
[[Plus:Dialog Case|Case]] | [[Plus:Dialog Case|Case]] | ||
Remark all alterations and characteristics of the current case variation and define the simulation period | Remark all alterations and characteristics of the current case variation and define the simulation period. | ||
[[Plus:Dialog Climate|Climate]] | [[Plus:Dialog Climate|Climate]] | ||
Select the boundary conditions. This can be either a climate from the WUFIplus database or user defined. | |||
Additional optional climates can be defined (e.g. ground, attached zones). | Additional optional climates can be defined (e.g. ground, attached zones). | ||
| Zeile 37: | Zeile 37: | ||
[[Plus:TreeBuilding|Building]] | [[Plus:TreeBuilding|Building]] | ||
Model the simulation building. | |||
For plain geometries use the building wizard to generate the simulation envelope. For more complex geometries use the 3D | For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'. | ||
| Zeile 49: | Zeile 49: | ||
[[Plus:TreeHeatedZones|Zone]] | [[Plus:TreeHeatedZones|Zone]] | ||
Make the stettings for the several zones. | |||
[[Plus:Visualized Components|Visualized Components]] | [[Plus:Visualized Components|Visualized Components]] | ||
Allocate the components to the respective zone. | |||
Define and asign the assemblies. | |||
Set the parameters for surface, initial conditions and numerics. | |||
[[Plus:Inner Loads|Inner Loads]] | [[Plus:Inner Loads|Inner Loads]] | ||
occuring inner loads by machines or occupants can be defined by the hour | The occuring inner loads by machines or occupants can be defined in profiles by the hour. | ||
[[Plus:Design Conditions|Design Conditions]] | [[Plus:Design Conditions|Design Conditions]] | ||
design conditions for the zone are defined by the hour as well. | The design conditions for the zone are defined by the hour as well. | ||
These values are setpoints for the HVAC system. | |||
[[Plus:Other Parameters|Other Parameters]] | [[Plus:Other Parameters|Other Parameters]] | ||
Version vom 11. Oktober 2010, 15:17 Uhr
Simulation procedure
This is a short description of a simulation procedure.
For detailed information to the several steps follow the links.
The elements of the navigation tree lead you step by step through all the necessary inputs.
Start with the definition of the general project information.
Are additional data or files are needed for the calculation, load it into the programm.
Remark all alterations and characteristics of the current case variation and define the simulation period.
Select the boundary conditions. This can be either a climate from the WUFIplus database or user defined. Additional optional climates can be defined (e.g. ground, attached zones).
Model the simulation building.
For plain geometries use the 'building wizard' to generate the simulation envelope. For more complex geometries use the '3D editor'.
Create the several heated zones within the simulation envelope.
Make the stettings for the several zones.
Allocate the components to the respective zone.
Define and asign the assemblies.
Set the parameters for surface, initial conditions and numerics.
The occuring inner loads by machines or occupants can be defined in profiles by the hour.
The design conditions for the zone are defined by the hour as well.
These values are setpoints for the HVAC system.
How Do I Use WUFI Plus?
The following will guide you through the process of setting up and performing a calculation with WUFI Plus, giving you a general impression of what you can do and how you can do it.
