Plus:HowTo: Unterschied zwischen den Versionen

Aus Wufiwiki
Zur Navigation springenZur Suche springen
Keine Bearbeitungszusammenfassung
Zeile 1: Zeile 1:
= Simulation procedure =
This is a short description of a simulation procedure. For detailed information to the several steps follow the links.
The elements of the navigation tree lead you step by step through all the necessary inputs.
* [[Plus:Dialog Project|Project]]
Definition of general project information
* [[Plus:Dialog Files / Measured data|Files / Measured data]]
additional required data and other files are loaded into the program
* [[Plus:Dialog Case|Case]]
remark alterations and characteristics of the current case variation
define the simulation period
* [[Plus:Dialog Climate|Climate]]
Choose a climate for the boundary conditions. This can be either from the WUFIplus database or a user defined one
Additional optional climates can be defined (e.g. ground, attached zones)
* [[Plus:TreeBuilding|Building]]
modelling the building. For plain geometries the building wizard can be used. It generates the geometry with a few inputs. For more complex geometries use the 3D Editor.
* [[Plus:TreeZones|Heated Zones]]
Create the several heated zones
* [[Plus:TreeHeatedZones|Zone]]
Define the stettings for the several zones.
* [[Plus:Visualized Components|Visualized Components]]
allocate the components to the respective zone
define the assemblies
set the parameters for surface, initial conditions and numeric
* [[Plus:Inner Loads|Inner Loads]]
occuring inner loads by machines or occupants can be defined by the hour
* [[Plus:Design Conditions|Design Conditions]]
design conditions for the zone are defined by the hour as well.
these values are setpoints for the HVAC system
* [[Plus:Other Parameters|Other Parameters]]
* [[Plus:TreeAttachedZones|Attached Zones]]
* [[Plus:Tree3D-Objects|3D-Objects]]
* [[Plus:Remaining elements|Remaining elements]]
* [[Plus:HVAC - Heating, Ventilating, Air Conditioning|HVAC]]


= How Do I Use WUFI Plus? =
= How Do I Use WUFI Plus? =

Version vom 11. Oktober 2010, 12:48 Uhr

Simulation procedure

This is a short description of a simulation procedure. For detailed information to the several steps follow the links.


The elements of the navigation tree lead you step by step through all the necessary inputs.


Definition of general project information


additional required data and other files are loaded into the program


remark alterations and characteristics of the current case variation define the simulation period


Choose a climate for the boundary conditions. This can be either from the WUFIplus database or a user defined one Additional optional climates can be defined (e.g. ground, attached zones)


modelling the building. For plain geometries the building wizard can be used. It generates the geometry with a few inputs. For more complex geometries use the 3D Editor.


Create the several heated zones


Define the stettings for the several zones.


allocate the components to the respective zone define the assemblies set the parameters for surface, initial conditions and numeric

occuring inner loads by machines or occupants can be defined by the hour


design conditions for the zone are defined by the hour as well. these values are setpoints for the HVAC system












How Do I Use WUFI Plus?

The following will guide you through the process of setting up and performing a calculation with WUFI Plus, giving you a general impression of what you can do and how you can do it.