Plus:DialogBuildingWizard

Aus Wufiwiki
Zur Navigation springenZur Suche springen
Die druckbare Version wird nicht mehr unterstützt und kann Darstellungsfehler aufweisen. Bitte aktualisiere deine Browser-Lesezeichen und verwende stattdessen die Standard-Druckfunktion des Browsers.


Building

The most important part of WUFI-Plus is the option to create a building.

The design of the building can create by two ways. The easier way is to use the automatic tool of the wizard. With this tool it is possible to design simple footprints and typical roof and cellar constructions. When the footprint and building construction is more complicated as the available samples there is the possibility to design the building over a script.

Automatic building wizard

The Building Wizard is a tool to design a house for the simulation.

WUFI-Plus BuidingWizard.png

With the automatic building wizard three essential points of a building can define, the footprint, the roof and the bottom offset. First of all you have to choose one of the proposed Main section (1), Roof (2)or Bottom offset (3). After this you can define the dimensions of the building. The yellow parts of the building are the heated zone and the white parts are unheated zones.

Below the selection graphs, given measures can be specified. These vary with the choice of footprint, roof or bottom offset.

After defining these the storey height and the number of stories can be defined on the left bottom side of the dialog. On the bottom right side of the dialog the orientation of the main facade needs to be defined. The main facade depends on the footprint of the building and is shown in the selection graph for the footprint selection.

If a building needs to get modified it is important to check the "Preserve previous data after generation" button on the very bottom on the left like shown on the right side, if it is not wanted to overwrite all previous settings for assemblies and windows and so on.

Check box to preserve previous data

Footprint Selection

Different choosable footprints

These footprints can actually be choosen in the Building Wizard.


Roof Selection

Different choosable roofs

These roofs can actually be choosen in the Building Wizard.


Bottom Offset Selection

Different choosable bottom offsets

These bottom offsets can actually be choosen in the Building Wizard.


Unheated zones

If you want to design an unheated attached zone, like a wintergarden you can do this with the page Attached zone in the building wizard.

WUFI-Plus BuildingWizard attached.png

Script